Preparation Station - YK-1 Series
Inside dimension |
6300×3450×2800mm(L×W×H) |
Outside dimension |
7550×3550×2880mm(L×W×H) |
Basement & Floor |
Without basement , 2 rows pit with grille,each pits dimension:4610×710mm (L×W). |
Ceiling System |
Dimension:6400×3550×80mm (L×W×H), roof frame made by 40×80 quadrate steel. |
Generator Setting |
2 rows of pit exhaust air,with quadrate steel frame,blue coated steel, |
Intake & Exhaust air system |
Generator dimension: 1300×1100×1100mm (L×W×H); with 1set 5.5KW fan for exhaust air,belt-drive motor set outside;Air capacity:16000m³/h,with electric damper control exhaust air capacity. |
Sealed Type |
Back side with 50mm EPS heat preservation panel,other 3 sides with PVC soft curtain, curtain color: upper part: white, middle color:transparent,lower part: blue |
Ceiling Installation |
Steel rope hanging or steel pole supporting the roof(Option). |
Lighting |
Not supply |
Filtering System |
Pre-filter pocket,floor filter(fibreglass). |
Control System |
control the operation of fan and electric damper |
Voltage frequency |
As request |
Total Power |
6KW |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: